Ricoh IS 2235 Settings Manual Download Page 154

Page: 154 / 196

Troubleshooting

142

Removing Jammed Staples

Note

❒

Curled paper may cause staples to jam. To avoid this, turn copy paper over
in the tray. If there is no improvement, change to stiffer copy paper.

❒

When the booklet finisher is installed, after removing jammed staples, staples
will not be ejected the first few times you try to use the stapler.

Reference

For types of finisher, see p.17 “External Options”.

1000-Sheet Finisher

• 1: Open the front cover of the finisher, and

then pull out the staple unit.

• 2: Hold the green lever while gently pull-

ing out the cartridge .

• 3: Open the cartridge's face plate.

• 4: Remove any jammed staples.

ZGJS801E

ZGJS802E

ZGJS813E

ZGJS814E

AdonisC4-AE_zen_F_FM_forPaper.book Page 142 Thursday, May 12, 2005 3:32 PM

Summary of Contents for IS 2235





































































































































































































Search results

Summary of Contents for IS 2235

Reviews:

Ricoh IS 2235, Settings Manual, Page: 154 / 196

Search results

Summary of Contents for IS 2235

Reviews: