manualshive.com logo in svg

Ricoh IS 2235, Settings Manual, Page: 134 / 196

Share
Download
Ricoh IS 2235 Settings Manual Download Page 134

Troubleshooting

122

6

D

 Adding Toner

When 

D

 appears, it is time to add toner.

R

 

WARNING:

R

 

CAUTION:

R

 

CAUTION:

R

 

CAUTION:

R

 

CAUTION:

R

 

CAUTION:

Important

❒

Faults may occur if you use toner other than the recommended type.

❒

When adding toner, do not turn off the operation switch. If you do, settings
will be lost.

❒

Always add toner when the machine instructs you.

❒

Do not repeatedly install and remove toner bottles. This will result in toner
leakage.

❒

Do not shake the removed toner bottle. Remaining toner might scatter.

Note

❒

You can make about 90 copies even after the “

D

Toner is almost emp-

ty.

”and “

Replace Toner Bottle.

” messages appear, but replace toner ear-

ly to prevent poor copy quality.

Reference

For details about toner storage, see p.151 “Toner Storage”.

•

Do not incinerate used toner or toner containers. Toner dust might ig-
nite when exposed to an open flame. Dispose of used toner containers 
in accordance with local regulations.

•

Keep toner (used or unused) and toner containers out of reach of children.

•

If toner or used toner is inhaled, gargle with plenty of water and move into a 
fresh air environment. Consult a doctor if necessary.

•

If toner or used toner gets into your eyes, flush immediately with large 
amounts of water. Consult a doctor if necessary.

•

If toner or used toner is swallowed, dilute by drinking a large amount of wa-
ter. Consult a doctor if necessary.

•

Avoid getting toner on your clothes or skin when removing a paper jam or 
replacing toner. If your skin comes into contact with toner, wash the affected 
area thoroughly with soap and water.

•

If toner gets on your clothing, wash with cold water. Hot water will set the 
toner into the fabric and may make removing the stain impossible.

AdonisC4-AE_zen_F_FM_forPaper.book  Page 122  Thursday, May 12, 2005  3:32 PM

Summary of Contents for IS 2235





































































































































































































Reviews:

No comments