Ricoh IS 2225, Function Manual

Page: 92 / 136

Troubleshooting
82
3
If You Cannot Make Copies As You Want
This section explains causes of, and remedies for, unexpected copy results.
❖
Basic
Problem Causes Solutions
Copies are not stapled. There are jammed staples
in the stapler. Remove jammed staples. See Gener-
al Settings Guide .
Note
❒
After removing jammed staples,
staples might not eject the first
few times you try to use the sta-
pler.
The number of copies ex-
ceeds stapler capacity. Check the stapler capacity. See p.112
“Staple”.
Copy paper is curled. Turn the copy paper over in the tray.
Staples are wrongly posi-
tioned. Originals are not placed
correctly. Check originals are placed in the
correct position. See p.43 “Staple”.
You cannot combine sever-
al functions. Selected functions cannot
be used together. Check the combination of functions
and make the settings again.
See p.107 “Combination Chart”.
When sorting, the pages
are divided into two
blocks. The memory became full in
the middle of sorting and
the pages were delivered in
two blocks. You can interrupt copying when
memory becomes full. See p.105
“Memory Full Auto Scan Restart”.
Paper does not output dur-
ing printing with stapling. If you stop printing while
using the staple function,
sheets not stapled during
printing may be left in the
staple unit. Press the
{
Clear Modes
}
key and can-
cel copy settings, including stapling.
The copy is grayed out, or
embedded text appears
conspicuously on the copy. You have copied a docu-
ment subject to unauthor-
ized copy prevention. Check the document.
General Settings Guide , Printer Refer-
ence .
RuC4_AE_Copy-F_FM_forPaper.book Page 82 Thursday, April 14, 2005 1:21 PM