manualshive.com logo in svg

Ricoh IS 2225, Function Manual

Share
Download
Ricoh IS 2225 Function Manual Download Page 17

7

Display Panel

The function items displayed serve as selector keys. You can select or specify an
item by lightly pressing them.
When you select or specify an item on the display panel, it is highlighted like

. Keys appearing as 

 cannot be used.

Note

❒

The following illustration is an example based on a machine with the 1000–
sheet finisher installed.

❖

Initial copy display

1.

Original function, Image Density

and Special Original function.

2.

Operational status and messages.

3.

You can register up to three fre-

quently used reduce/enlarge ratios
other than the fixed reduce/enlarge
ratios. See p.97 “Shortcut R/E”.

4.

Numbers of originals scanned

into memory, copies set, and copies
made.

5.

Sort, Stack, Staple functions.

6.

Displays contents of the Shortcut

keys. You can register frequently
used functions in these keys. See
p.96 “Copy Function Key: F1-F5”.

7.

Displays available functions.

Press a function name to display its
menu. For example, press 

[

Reduce/En-

large

]

 to bring up the Reduce/Enlarge

menu.

8.

A clip mark indicates the current-

ly selected function.

AHR024S

RuC4_AE_Copy-F_FM_forPaper.book  Page 7  Thursday, April 14, 2005  1:21 PM

Summary of Contents for IS 2225









































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands