Ricoh IS 2225 Function Manual Download Page 128

Page: 128 / 136

Specifications

118

❖

Front Cover, Front/Back Cover

• If Blank is selected, the cover is not counted as one copy.
• Front and back covers are copied two-sided depending on the Display

Time settings made in Cover Sheet Tray of User Tools (System Settings).
• If At Mode Selected is selected in Display Time, settings made in Cover

Sheet Tray have priority.

• If Full Time is selected in Display Time , settings made in Paper Type

have priority.
See “Paper Type”and “Cover Sheet Tray”in “Tray Paper Settings”,

Gen-

eral Settings Guide

❖

Designate

If the Combine function (“1 Sided

→

2 Sided”) is selected, designated page

numbers appear on the front of copies, in the same way as with the Chapters
function.

❖

Slip Sheets

If you do not copy onto slip sheets, they are excluded from the number of cop-
ies counted.

RuC4_AE_Copy-F_FM_forPaper.book Page 118 Thursday, April 14, 2005 1:21 PM

Summary of Contents for IS 2225









































































































































Search results

Summary of Contents for IS 2225

Reviews:

Brands by name

Popular brands

Ricoh IS 2225, Function Manual

Search results

Summary of Contents for IS 2225

Reviews:

Brands by name

Popular brands