44
English
Troubleshooting
Problem: Image is unstable or flickering
Change the monitor setting from your computer.
Check and reconfigure the display mode of your graphic card to
make it compatible with the product.
Problem: Image is out of focus
Adjust the Focus Ring on the projector.
Make sure the projection screen is between the required distance.
Problem: The image is stretched when displaying 16:9 DVD
Change “Aspect Ratio” by pressing the “Menu” key on the control
panel and change the image format in “Menu” > “Image” > “Aspect
Ratio”.
Problem: Image is too small or too large
Move the projector closer to or further from the screen.
Press “Menu” key on the control panel and then go to “Menu” >
“Image” > “Aspect Ratio” and try the different settings.
Problem: Image is reversed
Press “Menu” key on the control panel and then go to “Menu” >
“Display” > “Projection” and adjust the projection direction.
Problem: Projector turned off with power adapter
Ensure the power adapter output is 5V/2A or higher.
Ensure the environmental temperature is in the range of 32° to
86°F (0° to 30°C).
Summary of Contents for Image Pointer GP01
