Ricoh Image Pointer GP01, User Manual

Page: 21 / 60

English
19
English
Basic Operations
Powering On the Projector and Connecting
to the iOS Device (Connection via Router)
1. Turn on the projector by pressing and holding the “Power”
key for 1 second or longer.
The power LED around the “Power” key will turn blue
and the RICOH logo will be displayed on the screen for 20
seconds. After that is displayed a blank screen.
2. Press the “Input” key for 0.5 seconds or longer to display
the Input Source menu. Press the
/
keys to change the
input source to iOS. Then press the “Display/Enter” key.
3. Configure the router connection settings in the “Setup” >
“Wifi Setting” > “Internet” menu. Configure the connection
settings to the router also on your iOS device.
4. Press the “Display/Enter” key to display the screen. If the
connection to the iOS device has not been established, the
Device Name and Password message will appear on the
top left corner of the screen.
5. Swipe up from the bottom of the iOS screen to open the
Control Center. Tap on “Screen Mirroring”.
6. Tap on the connected ImagePointer to start the screen
mirroring.

Press the “Input”
key for 0.5 seconds or
longer to display the
Input Source menu.

To learn how to
use your iOS device,
please refer to the
operating instructions
that came with the
device.
Note