English
21
English
Basic Operations
Powering Off the Projector
1. Press and hold the “Power” key for 2 seconds to turn
off the projector. You will see a message as below on the
screen.
Power off
If you wish to turn the projector back on, you must wait
until the projector has entered the standby mode. When
it is in standby mode, simply press “Power” to restart the
projector.
2. Disconnect the USB-C cable from the projector.
Warning Indicator
When the LED indicator flashes red and blue (0.1 sec
on / 0.1 sec off / 0.1 sec on / 0.1 sec off / 0.1 sec on /
0.5 sec off ) and the message below displays onscreen, it
indicates the projector has overheated. Ensure that the
ambient temperature is within operating range. If the
problem persists, please contact the vendor.
Warning! Temperature too High
Summary of Contents for Image Pointer GP01
