background image

1. Press the Back Light Control Button (BLC/ +2) and the ~ mark will be displayed in the LCD Control Panel.  

* If you wish to clear the back light control once it is activated, press the Back Light Control Button again.  

* Once the camera is fired, back light control is cleared.  
   

DISPLAY MODE

  

When the Display Mode Button is pressed, the film advance up to 24 exposure and rewind operation is displayed 
repeatedly on the LCD Control Panel.  

* The display mode is cleared when;  

1. Press the Display Mode Button again or  

2. Fire the camera.  

* The camera cannot be set to display mode when the film is rewound and "E" is displayed in the LCD Control 
Panel.  
   

PROPER CARE OF YOUR CAMERA

  

   

* If there is dirt on the lens or Distance Measuring Windows, do not touch directly with your fingers. Use a blower 
to blow the dust away, or wipe the surface gently with a soft cloth.  

* Camera malfunction can be caused by shock, humidity, salt etc. After using the camera at the beach or places 
where there are chemicals, wipe it particularly carefully.  

* Take care not to expose the camera to sudden changes in temperature, as they may cause malfunction.  

* Do not expose the camera for a long period of time in extremely high temperatures, such as in your car or on the 
beach, as this may cause malfunction.  

* When using a tripod, do not try to force a long screw into the socket. (The screw length should be less than 5.7 
mm.)  

* Do not place the camera near equipment that has strong magnetism such as television or radio.  

* Remove the batteries before storing the camera, and keep the camera in a place that is free of dust and 
humidity.

4www.butkus.org

  

* Avoid keeping the camera in a closet etc. where the camera may be affected by mothballs, insecticides, etc.  
   

MAJOR SPECIFICATIONS

  

 Type: 35 mm lens shutter type with automatic focusing  

Lens: 35 mm F2.8 Rikenon lens, 5 elements, 5 groups  

Summary of Contents for FF-90















Reviews: