SETTING THE FILM SPEED
Please check whether the film has a DX code system or not.
A film with a DX code
1. Setting the film speed is not necessary. The camera automatically makes the
correct film speed setting. The film speed as well as "DX AUTO" is displayed
on the LCD Control Panel.
A film without DX code
* When the film previously used had a DX code system, "100" flashes in the
LCD Control Panel and if the film
was non-DX, the speed of the previous film flashes.
* Pressing the Manual Film Speed Set Button once stops the flashing of the speed.
1. The film speed is indicated on the outer packaging of the film. e.g. ASA 100 (ISO 100)
2. Press the Manual Film Speed Set Button until the speed of your film is displayed in the LCD Control Panel.
* When the Manual Film Speed Set Button is kept depressed, the speeds adVance automatically.
* Please be careful when you take a picture with ISO 1000 or 1600 film in bright sunlight, the picture may be
overexposed.
