Ricoh D1 Operating Instructions Manual Download

Page: 83 / 106

Setting with AdminManager

Setting Functions

SMTP

Item

Details

Default

Use SMTP Protocol

Enables SMTP Protocol. If set to disable, E-mail
transmission is canceled.

DISABLE

SMTP Server
Name

Sets domain name or IP address as host name. DNS
server setup is required if domain name is used.

None

From Address

Sets the sender address. Network Administrator's mail
address is used normally.

None

To Address(1-2)

Sets the recipient address.

None

ransmission Condition 1-2

Selected Conditions

Off line

Send a mail when the printer enters off line.

OFF

Paper
Empty

Send a mail when the printer runs out of paper.

OFF

Power Off

Send a mail when the printer is turned off.

OFF

Check interval

Checks the event log at the speci

ed intervals (by minute).

The list will be sent if more than 1 event occurs.

Summary of Contents for D1











































































































Search results

Summary of Contents for D1

Reviews:

Related manuals for D1

Brands by name

Popular brands

Ricoh D1, Operating Instructions Manual

Search results

Summary of Contents for D1

Reviews:

Related manuals for D1

Brands by name

Popular brands