Ricoh D1, Operating Instructions Manual

Page: 88 / 106

80
Web Browser Setup Items
General
Item
Details Default
Web browser
Change root
Password Sets the password in ASCII strings (within 7
characters). This is used as Authentication
password for AdminManager and Web.
None
LAN Interface Sets the physical network type. Use in AUTO
normally. If LINK lamp on the hub does not light,
change the setting to the network type of the
connected hub.
AUTO
Item
Details Default
Web browser
TCP/IP Protocol Enables TCP/IP protocol. ENABLE
DHCP/BOOTP Enables DHCP/BOOTP protocol. Toggle between
DHCP and BOOTP automatically and obtains an
IP address.
ENABLE
RARP Enables RARP protocol. ENABLE
IP Address Sets the IP address in the form “xxx.xxx.xxx.xxx"
(decimal).
0.0.0.0
Subnet Mask Sets the Subnet Mask in the form “xxx.xxx.xxx.
xxx“ (decimal). "0.0.0.0" is canceled, and the
Subnet Mask complying with the IP address is
automatically used.
0.0.0.0
Default
Gateway Sets the Default Gateway in the form “xxx.xxx.
xxx.xxx“ (decimal). "0.0.0.0" is canceled
0.0.0.0
TCP/IP