Ricoh D1, Operating Instructions Manual

Page: 54 / 106

46
Printing with LPR Port
Add a LPR compatible printer.
Enter IP address and ‘ip’, and click [OK].
Register a printer name.
If you are not using a speci
fi c printer name, use the
default one. Click [Next].
If another printer has been installed previously, you
can select whether to set this printer to the default
printer.
If you are going to print a test page, click [Print a
test page].
Click [Finish].
• If you installed a new driver separately, select
[Replace the current driver].
Check the printer driver.
Select [Use the driver that is currently installed
(recommended)] or [Replace the current driver], and
click [Next].
Select a printer driver.
Click [Next].
• Click [Have Disk] to install using the printer
driver disk supplied with the printer.
• For the installation, refer to the printer driver
manual supplied with the printer.
REFERENCE
REFERENCE