T
echnical
B
ulletin
PAGE: 1/3
Model:
GR-C1
Date: 6-Apr-17
No.: RD117061
Subject:
Manual Correction: Procedure of Installing Anti-
condensation Heater (MainFrame)
Prepared by:
Norito Yasuda
From:
2st Tech Service Sec. MFP/P Tech Service Dept.
Classification:
Troubleshooting
Mechanical
Paper path
Part information
Electrical
Transmit/receive
Action required
Service manual revision
Retrofit information
Product Safety
Other (
)
Tier 2
Service Manual Correction:
Please apply the following two corrections to your FSM:
a) 2. Installation > Anti-condensation Heater (Mainframe) > Installation Procedure
(P.105)
When installing
only the optional Paper Feed Unit tray heater
, do the following:
・
Remove the cover [E], and then pull out the junction harness connectors [A] and [B].
・
Store the connector [A] in the open space shown below.
・
Store the connector [B] into the cover [E], and then attach the cover [E].
[E]
