Ricoh Aficio MP C2500 EFI General Settings Manual Download

Page: 87 / 316

Administrator Tools

Enter the new name, and then press

[

]

Press

[

]

❖

Address Book: Switch Title

Specifies the title to select a name.
•

Title 1

• Title 2
• Title 3

❖

Back Up / Restore Address Book

You can back up the machine’s address book to external storage or restore the
backup copy from the external storage.
• Back Up

You can back up the machine’s address book to external storage.

• Restore

You can restore the backup copy of the address book from external storage.

• Format

You can format the external storage.

• Obtain Media Info

The free space and occupied space of the external storage are displayed.

❖

Display/Print Counter

Allows you to view and print the number of prints.
• Display/Print Counter

Displays the number of prints for each function (Total, Copier, Facsimile,
Printer, A3/DLT, Duplex, and Staple).

• Print Counter List

Prints out a list of the number of prints made under each function.

❖

Display/Clear/Print Counter per User

Allows you to view and print the numbers of prints accessed with user codes,
and to set those values to 0.
Press

[

Previous

]

and

[

Next

]

to show all the numbers of prints.

The number of prints may differ from the counter value shown in Dis-
play/Print Counter.
• Print Counter for All Users

Prints the counter values for all the users.

• Clear Counter for All Users

Sets the counter value for all the users.

• Print Counter per User

Prints the counter values for each user.

• Clear Counter per User

Sets the counter value for each user.

Summary of Contents for Aficio MP C2500 EFI





























































































































































































































































































































Search results

Summary of Contents for Aficio MP C2500 EFI

Reviews:

Related manuals for Aficio MP C2500 EFI

Brands by name

Popular brands

Ricoh Aficio MP C2500 EFI, General Settings Manual

Search results

Summary of Contents for Aficio MP C2500 EFI

Reviews:

Related manuals for Aficio MP C2500 EFI

Brands by name

Popular brands