Ricoh Aficio MP C2500 EFI, General Settings Manual

Page: 94 / 316

System Settings
86
2
To enter the user name and password
A
Press [
T
Next ] .
B
Press [ Change ] under “User Name”.
When [ On ] or [ High Security ] is selected for the authentication setting, use the
administrator account name and password. Do not enter the administrator
account name and password when using authentication for each individual
or each search.
C
Enter the user name, and then press [ OK ] .
Procedures for the user name setting differ depending on server environ-
ment. Check your server environment before making the setting.
Example: Domain Name\User Name, User Name@Domain Name,
CN=Name, OU=Department Name, DC=Server Name
D
Press [ Change ] under “Password”.
E
Enter the password, and then press [ OK ] .
The user name and password are required for administrator access to the
LDAP server.
You can set the user name and password in this machine’s Address Book to
allow individual authentication access to the LDAP server. Use Administra-
tor Tools to select the user name and password you want to use.
To test the connection
A
Press [ Connection Test ] .
Access the LDAP server to check the proper connection is established. Check
authentication works according to the authentication settings.
A connection test is carried out.
B
Press [ Exit ] .
If the connection test fails, check your settings and try again.
This function does not check search conditions or the search base.