Ricoh Aficio MP 2550B, Service Manual

Page: 805 / 1153

Bit Switches
SM 71 D361
Fax Op
tion
Ty
pe 3
350
D36
1
System Switch 1E (SP No. 1-101-031)
No Function Comments
ƒ
This setting is effective only when
Automatic Journal printout is enabled
but the machine cannot print the report
(e.g., no paper).
2
RTI/CSI display priority
0: RTI 1: CSI
This bit determines which identifier, RTI or CSI,
is displayed on the LCD while the machine is
communicating in G3 non-standard mode.
3
File No. printing
0: Enabled
1: Disabled
1: File numbers are not printed on any reports.
4
Action when authorized
reception is enabled but
authorized RTIs/CSIs are not
yet programmed
0: All fax reception is disabled
1: Faxes can be received if the
sender has an RTI or CSI
If authorized reception is enabled but the user
has stored no acceptable sender RTIs or CSIs,
the machine will not be able to receive any fax
messages.
If the customer wishes to receive messages
from any sender that includes an RTI or CSI,
and to block messages from senders that do
not include an RTI or CSI, change this bit to
"1", then enable Authorized Reception.
Otherwise, keep this bit at "0 (default setting)".
5-7 Not used Do not change the settings
System Switch 1F (SP No. 1-101-032)
No Function Comments
0 Not used Do not change the settings.
1
Report printout after an original
jam during SAF storage or if the
SAF memory fills up
0: When an original jams, or the SAF memory
overflows during scanning, a report will be
printed.