Ricoh Aficio MP 2550B, Service Manual

Page: 806 / 1153

Bit Switches
D361 72 SM
System Switch 1F (SP No. 1-101-032)
No Function Comments
0: Enabled
1: Disabled
Change this bit to "1" if the customer does not
want to have a report in these cases.
Memory tx – Memory storage report
Parallel memory tx – Transmission result report
2 Not used Do not change the settings.
3
Received fax print start timing
(G3 reception)
0: After receiving each page
1: After receiving all pages
0: The machine prints each page immediately
after the machine receives it.
1: The machine prints the complete message
after the machine receives all the pages in the
memory.
4-6 Not used Do not change the factory settings.
7
Action when a fax SC has
occurred
0: Automatic reset
1: Fax unit stops
0: When the fax unit detects a fax SC code
other than SC1201 and SC1207, the fax unit
automatically resets itself.
1: When the fax unit detects any fax SC code,
the fax unit stops.
Cross Reference
Fax SC codes - See "Troubleshooting"
4.3.2 I-FAX SWITCHES
I-fax Switch 00 (SP No. 1-102-001)
No Function Comments
Original Width of TX Attachment File
This setting sets the maximum size of the
original that the destination can receive. (Bits
3~7 are reserved for future use or not used.)
0 A4 0: Off (not selected), 1: On (selected)