Ricoh Aficio MP 2550B Service Manual Download Page 267

Page: 267 / 1153

Service Program Mode

SM 5-3

D017/D018/D019/D020

Service

bles

mode screen, press SP Mode (highlighted) in the copy window.

Enter the SP code directly with the number keys if you know the SP number and then

press

. (SP Mode must be highlighted before you can enter the number. Just press SP

Mode if it is not highlighted.)

Press twice to leave the SP mode and return to the copy window to resume normal

operation.

Press any Group number to open a list of SP codes and titles for that group. For example,

to open the SP code list for SP1nnn, press Group1. If an SP has sublevels, touch the

appropriate button to expand the list.

Press to scroll the display to the previous or next group.

Press to scroll to the previous or next display in segments the size of the screen display

(page).

Press to scroll the display to the previous or next line, line by line.

Press to move the highlight on the left to the previous or next selection in the list.

Switching Between SP Mode and Copy Mode for Test Printing

1. In the SP mode, select the test print and then press Copy Window.

2. Use the copy window (copier mode), to select the appropriate settings (paper size,

etc.) for the test print.

3. Press the Start button (

) to execute the test print.

4. Press SP Mode (highlighted) to return to the SP mode screen and repeat from step 1.

Selecting the Program Number

Program numbers have two or three levels.

1. Before you begin, refer to the Service Tables to find the SP that you want to adjust.

(See ‘Service Program Mode Tables’.)

2. Press the Group number on the left side SP Mode window that contains the SP that

you want to adjust.

3. Use the scrolling buttons in the center of the SP mode window to display the SP

number that you want to open, and then press that number to expand the list.

4. Use the center touch-panel buttons to scroll to the number and title of the item that you

want to set and press. The small entry box on the right is activated and displays the

default or the current setting below.

Summary of Contents for Aficio MP 2550B


































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for Aficio MP 2550B

Reviews:

Related manuals for Aficio MP 2550B

Brands by name

Popular brands

Ricoh Aficio MP 2550B, Service Manual

Search results

Summary of Contents for Aficio MP 2550B

Reviews:

Related manuals for Aficio MP 2550B

Brands by name

Popular brands