9
User's Notes
z
High temperatures inside the printer can cause a breakdown. Do not lean anything against the
vent or block it in any way.
z
Warm air from the vent is normal and not a cause for concern.
z
Do not leave the top cover open. Doing so could cause an injury.
z
During printing, do not move the printer or open its covers.
z
During printing, do not pull out a paper tray. Printing will stop and the paper will jam.
z
Do not touch the feed belt.
z
Take care not to let paper clips and other foreign objects fall inside the printer.
z
During printing, do not turn off the power or unplug the power cord from the wall outlet.
z
During printing, do not subject the printer to external shock such as that caused by tapping paper
on it.
z
When not using the printer, turn off the power.
z
Do not place more than 5 kg (11.1 lb.) on the printer. (The outer surface of the printer can tolerate
up to 20 kg (44.1 lb.).)
z
Type 1 has a nominal operational life of 5 years if used normally for 8 hours a day to produce up
to 2,500 A4 prints a month. Exceeding these limits may reduce the operational life. The opera-
tional life also depends on the environment in which the printer is used.
z
Type 2 has a nominal operational life of 5 years if used normally for 8 hours a day to produce up
to 3,300 A4 prints a month. Exceeding these limits may reduce the operational life. The opera-
tional life also depends on the environment in which the printer is used.
z
”Total Counter” displays the number of pages printed. Use "Total Counter" to estimate the
number of pages that can be printed within the printer's remaining operational life. The printer's
operational life is calculated based on the number of pages that it can print on plain paper in
[Speed priority] mode.
z
Type 1 is designed to have an operational life of 5 years or be good for 150,000 pages.
z
Type 2 is designed to have an operational life of 5 years or be good for 200,000 pages.
z
Depending on your printing document, the ink collector unit may fill up sooner than normal.
An "Ink Collector almost full" message appears shortly before the ink collector unit is full. Contact
your service representative as soon as possible for a replacement ink collector unit (charge
incurred).
ToscanaP1N_SetupHandbook_F_att-GB_cvtd.book Page 9 Tuesday, October 2, 2007 2:40 PM
