Ricoh Aficio DSm616 Page 74 Operating Instructions Manual Download

Page: 74 / 80

Specifications

❖

Combine

• When using this function, the machine selects the reproduction ratio auto-

matically. This reproduction ratio depends on copy paper sizes and the
number of originals.

• The reproduction ratios you can specify are 50–200%.
• If the calculated ratio is under the minimum ratio, it is automatically ad-

justed to within available range. However, with some ratios, parts of the
image might not be copied.

• You cannot use custom size paper.
• If the orientation of originals is different from that of the copy paper, the

machine will automatically rotate the image by 90

to make copies proper-

ly.

• If the number of originals placed is less than the number specified for com-

bining, the last page segment is left blank as shown.

❖

Duplex Margin (Type 3 only)

• If you set a binding margin that is too wide, part of the image may not be

copied.

• When making copies using the Combine function, the binding margin is

added to the copies when combining is finished.

KirC2_GBcopyF_FM.book Page 66 Friday, April 15, 2005 2:55 PM

Summary of Contents for Aficio DSm616

















































































Search results

Summary of Contents for Aficio DSm616

Reviews:

Related manuals for Aficio DSm616

Brands by name

Popular brands

Ricoh Aficio DSm616, Operating Instructions Manual

Search results

Summary of Contents for Aficio DSm616

Reviews:

Related manuals for Aficio DSm616

Brands by name

Popular brands