Ricoh Aficio DSm616 Operating Instructions Manual Download Page 2 | Manualshive

Page: 2 / 80

background image

Introduction

This manual contains detailed instructions and notes on the operation and use of this machine. For your
safety and benefit, read this manual carefully before using the machine. Keep this manual in a handy
place for quick reference.

Important

Contents of this manual are subject to change without prior notice. In no event will the company be li-
able for direct, indirect, special, incidental, or consequential damages as a result of handling or oper-
ating the machine.

For safe and correct use of this machine, please be sure to read the Safety Information in this manual
before you use it.

Notes

Some illustrations in this manual might be slightly different from the machine.

Certain options might not be available in some countries. For details, please contact your local dealer.

Laser Safety:

This machine is considered a class 1 laser device, safe for office/EDP use. The machine contains a 5-
milliwatt, 760-800 nanometer wavelength, GaAIAs laser diode. Direct (or indirect reflected ) eye contact
with the laser beam might cause serious eye damage. Safety precautions and interlock mechanisms
have been designed to prevent any possible laser beam exposure to the operator.

The following label is attached on the back side of the machine.

Caution:

Use of controls or adjustment or performance of procedures other than those specified in this manual
might result in hazardous radiation exposure.

Notes:

The model names of the machines do not appear in the following pages. Check the type of your ma-
chine before reading this manual. (For details, see p.6 “Machine Types”.)

•

Type 1: DSm616

•

Type 2: DSm620

•

Type 3: DSm620d

Certain types might not be available in some countries. For details, please contact your local dealer.

Two kinds of size notation are employed in this manual. With this machine refer to the metric version.

For good copy quality, The supplier recommends that you use genuine toner from the supplier.

The supplier shall not be responsible for any damage or expense that might result from the use of parts
other than genuine parts from The supplier with your office product.

Power Source

220 - 240V, 50/60Hz, 7A or more

Please be sure to connect the power cord to a power source as above. For details about power source,
see p.59 “Power Connection”.

KirC2_GBcopyF_FM.book Page 1 Friday, April 15, 2005 2:55 PM

«
1
2
3
4
...
»

Summary of Contents for Aficio DSm616

















































































Reviews:

No comments

Related manuals for Aficio DSm616

Brand: Canon Pages: 96

Brand: Canon Pages: 2

Brand: Canon Pages: 2

Brand: Canon Pages: 2

BJC-6000 Series

Brand: Canon Pages: 10

Brand: Canon Pages: 2

BJC-5100 Series

Brand: Canon Pages: 2

Brand: Canon Pages: 4

BJC-4400 Series

Brand: Canon Pages: 15

BJC-3000 Series

Brand: Canon Pages: 8

BJC-3000 Series

Brand: Canon Pages: 2

BJC-2100 Series

Brand: Canon Pages: 9

Brand: Canon Pages: 11

BJC-2100 Series

Brand: Canon Pages: 9

Brand: Canon Pages: 206

900D - i Color Inkjet Printer

Brand: Canon Pages: 30

8996A001 - i 455 Color Inkjet Printer

Brand: Canon Pages: 4

820D - S Color Inkjet Printer

Brand: Canon Pages: 140

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands