background image

2-6

 

 

Prevent foreign objects, such as paper clips, etc., from falling inside the printer. 

 

During printing, do not switch the power off and do not unplug the power cable. Sudden 
power interruptions can cause malfunctions. 

 

While printing, protect the printer from external shocks, such as arranging papers on top of 
the printer. 

 

Depending on temperature and humidity, during printing a while steam may come from the 
printing paper when it leaves the printer. 

 

The paper exit and nearby parts may become hot during printing. This is normal and no 
reason for concern. 

 

This unit is designed and manufactured to have a life expectancy of 5 years based on a 
monthly printing volume of 2,000 sheets (A4 with a 1:1 ratio of color printing and 
monochrome printing) when the power is on for a total of 8 hours per day). If the monthly 
number of printed pages exceeds 10,000 sheets or if the time the power is on exceeds 8 
hours a day, life expectancy shortens. The 5 years figure is also based on a ratio of 1:1 of 
color printing and monochrome printing. Should the number of sheets of color printing 
exceed this ratio, the total number decreases. 

Summary of Contents for Aficio CL800













































Reviews: