Ricoh Aficio 2022, Service Manual

Page: 273 / 849

SERVICE PROGRAM MODE
SM 4-57 B089/B093
Service
Tables
SP6XXX: Peripherals
6006* DF Adjustment
These settings adjust the registration and other settings for the ADF mode. Use
the

key to toggle b and - before entering a value. For more details,
see “Replacement and Adjustment - Copy Adjustment” for details.
6006 1 Side-to-Side
(For Simplex)
6006 2 Leading Edge
[–5.0 ~ +5.0 / 0.0 / 0.1 mm/step]
6006 3 Trailing Edge Erase Adjusts the trailing edge erase margin.
. [–5.0 ~ +5.0 / 1.0 / 0.1 mm/step]
6006 4 Side-to-Side/Rear
(For Duplex)
Adjusts the side-to-side registration on the rear side of
the original
.
[–5.0 ~ +5.0 / 0.0 / 0.1 mm/step]
6006 5 Sub Scan
Magnification
Adjusts the sub scan magnification .
[–5.0 ~ +5.0 / 0.0 / 0.1 % step]
6006 6 Skew Correction Selects whether skew correction is done.
0 = Off,
1 = On
6006 7 Original Buckle
Adjustment
Adjusts the amount of original buckle at the ARDF
registration roller when the ARDF feeds the back side of
the original.
[–5.0 ~ +5.0 /
0.0 / 0.1 mm/step]
ADF Input Check 6007
Displays the signals received from sensors and switches of the ARDF.(
!
4.2.4)
ADF Output Check 6008
Switches on each electrical component (ARDF motor, solenoid, etc.) of the ARDF
for testing. (
!
4.2.5)
Press

to switch on or

to switch off.
ADF Free Run 6009
Performs an ARDF free run in duplex mode. Press

to start.
1: To Start, 0: To cancel
This is a general free run controlled from the copier. For more detailed free run
modes, see the ARDF manual.
Stamp Position Adjustment 6010*
Adjusts the stamp position in the sub-scan direction in fax mode.
[–5.0 ~ +5.0 /
0 / 1 mm/step]
ADF Original Size Detection 6016*
Selects whether the machine determines that the original is A4/LT, or 8K/16K
when the APS sensor in the ADF does not detect the original size.
8K/16K is not available for 115V machines.
[ 0 = Normal (LT for USA models, A4 for Europe/Asia models)
1 = Reversed [A4 for USA models, LT for Europe/Asia models]
2 = 8K/16K]