10.8 PICK-UP SOLENOID GAP ADJUSTMENT
1. Measure the gap [A] between the pick-up roller [B] and pick-up lever [C]
while pushing the solenoid bar [D].
2. If the gap is not within specifications (0.1 to 0.6 mm), perform the
following step.
3. While pushing the solenoid bar [D], loosen the pick-up solenoid
bracket (2 screws) [E] and secure them so that the gap [A] is within
specifications.
[A]
[D]
[C]
[B]
[C]
[B]
[E]
Adjustment Standard: 0.1~0.6 mm
ARDF
12 February 1992
REPLACEMENT AND ADJUSTMENT
37
