Series PA/F, PA/S
Page
15
9510-010-en
Revision 18
TM 9549
Edition 11/2018
♦
Insert guide ring
302
from the bottom into cover
106
,
and push the ring into the groove.
♦
Turn cover
106
around, and insert two packing rings
402
.
ATTENTION
: Offset overlapping from ring to ring by
60° to 90°.
♦
Insert thrust ring
405
.
♦
Place packing gland follower
503
.
♦
Insert two stud screws
902
, and loosely fasten them
with hex nuts
920
. Do not yet tighten the hex nuts!
♦
Insert actuation
515
into cover
106
.
♦
Insert stem
855
and bellows
206
into cover
106
.
♦
Place cover
106
on body
100
. Make sure that actu-
ation
515
is located on the same side as the name
plate.
♦
Attach cover
106
with stud screws
902
and hex nuts
920
to body
100
. See
Section 1.2
for the tightening
torques of the body screws.
