8
Revision 2
Motor Installation:
Before you start:
•
The GTR212 Sliding Gate Automation Kit is suitable for powering the opening
and closing motion of gates up to 2000kg in weight, up to a length of 12m.
•
Gate motion is achieved by the rotating cog of the gate motor driving the gear
rack fitted to the moving gate (GTR092, sold separately).
•
The gate motor requires you to press the remote control once to open, and once
again to close. This is a safety feature to ensure safe operation.
•
The gate motor itself must be fitted within private property, never externally to a
property’s boundary.
Power Supply: The GTR212 requires 1 x 10Amp
AC240V 50Hz power supply (RCD Protected
Weatherproof PowerPoint). The GTR212 comes complete with a power lead and plug that is 1m long.
If you do not have a suitable RCD protected weatherproof power point within 1m of the gate motor you
will need to consult a licenced electrician.
Any works done to the motor must be completed whilst the power is off and the motor is
unplugged.
Any modifications/alterations/works to the 240V AC power components must only be
completed by a licensed electrician for your state/country.
Please Note:
Your weatherproof power outlet should be no more than 1m from the electric
gate motor.
If your weatherproof power outlet is more than 1m from the gate motor, you will
require a licensed electrician to fit a new power cable.
Any excess cable length should be cable tied and secured out of the way of
moving objects.
Please Note:
The warning
signage provided
(Part 5) must be
displayed on the
street facing side
of your automatic
gate at all times.
