RM310
3+1 burners gas grill
27
firebox.
Cleaning the Grease Tray and Box
To reduce the chance of fire, the grease tray and grease pan should be visually inspected before each
grill use. Remove any grease and wash both with a mild soap and warm water solution.
Cleaning the Inside of the Grill Lid
Grease can have a tendency to build up on the inside of the grill lid and could drip onto the deck or patio
when the lid is opened. Visually inspect the inside of the grill lid before each grill use. Remove any
grease and wash with a mild soap and warm water solution.
Annual Cleaning of the Grill Interior
Burning-off excess food after every cookout will keep it ready for instant use. We recommend you
periodically give the entire grill a thorough cleaning to minimize your risk of grease fire and keep the
grill in good shape. Follow these steps:
1. Turn all burner valves to the “OFF” position.
2. Turn the LP gas tank valve to the “OFF” position.
3. Disconnect the regulator assembly from the gas tank. Inspect the hose for cracking, cuts or any other
damage, and replace as necessary. Refer to the Parts List in this Operator’s Manual.
4. Remove and clean the cooking grates, heat diffusers, warming rack, burners, and grease tray.
5. Cover each gas valve orifice with aluminum foil.
6. Brush the inside and bottom of the grill with a fiber pad or nylon brush and wash with a mild soap
and warm water solution. Rinse thoroughly and let dry.
7. Remove aluminum foil from orifices and check each orifice for obstruction.
8. Replace the burners, ensuring the burners fit down over each valve orifice.
9. Check and clean each electrode tip. Adjust the spacing between the tips and the burner as necessary.
The space between the electrode tip and burner should be approximately 3/16”.
10. Replace the heat diffusers, grates, warming rack, and grease tray.
11. Reconnect the gas source and observe the burner flame for correct operation.
Cleaning Exterior Surfaces:
Cleaning Exterior Surfaces: Wash with a mild dish soap and warm water solution. A cloth, soft brush, or
plastic cleaning pad can be used. Rinse thoroughly and wipe dry.
Cleaning Exterior Stainless Steel Surfaces: Wash with a mild dish soap and warm water solution. Clean
and polish with a stainless steel cleaner. There are many good quality stainless steel cleaners and
polishes available. Follow the manufacturer’s directions. Always polish in the direction of the lines. Do
not allow dirt and grease to accumulate. Do not use steel wool as it will scratch the surface. Do not use
abrasive cleaners and scrubbers.
