7
Push Buttons
Light Test
Press the Light Test Push Button to enter the testing mode to check if the
Lighting Control Switch has been correctly set in order to control the lights
based on desired timer.
Procedure:
1. Select Dip Switch 7 to be ON
2. Press LIGHT TEST push button until the LOAD LED blinking in green
and red in turns.
3. The light will be lit on when the power circuit is operating well.
4. Press LIGHT TEST push button to return to charge battery/load control
state.
PUSH
Manual
Equalize/LVR
When there is a fault occurring, push Manual Equalize/LVR to reset it.
HOLD
Manual
Equalize/LVR
Battery charge control mode: Hold Manual Equalize/LVR to start equalization
and press it again to stop equalization.
※
Optional Remote LCD Meter for SW-30CL and SW-45CL
One Remote LCD Meter can be added to the SW-30CL at any time during or after
installation. The display is a 2x16 LCD meter with backlighting. One pushbuttons is
used to scroll through the displays function.
There are a series of display screens that provide information such as:
• Operating information and data
• Reset Amp-Hours