Rice Lake Tracer AV, Installation Manual

Page: 34 / 46

Tracer AV
30 Visit our website www.RiceLake.com
Command Description Values
PWRUPMD Power up mode GO, DELAY
REGULAT Regulatory compliance NTEP, OIML, CANADA, NONE
CONSNUM Consecutive number 0–999 999
CONSTUP Consecutive number start-up value 0–999 999
DATEFMT Date format MMDDYY, DDMMYY, YYMMDD, YYDDMM
DATESEP Date separator SLASH, DASH, SEMI
TIMEFMT Time format 12HOUR, 24HOUR
TIMESEP Time separator COLON, COMMA
Table 5-7. PROGRM EDP Commands
Command Description Values
SP1 SP2
SP1.ENABLE SP2.ENABLE Setpoint enable OFF, ON
SP1.KIND SP2.KIND Setpoint kind GROSS, NET
SP1.VALUE SP2.VALUE Setpoint value number
SP1.TRIP SP2.TRIP Trip Higher, Lower, Inband, Outbnd
SP1.BNDVAL SP2.BNDVAL Band value number
SP1.HYSTER SP2.HYSTER Hysteresis number
SP1.ACCESS SP2.ACCESS Setpoint access OFF, ON
Table 5-8. SETPNTS EDP Commands
Command Description Values
DIGIN1
DIGIN2
Digital input function OFF, ZERO, TARE, NT/GRS, UNITS, DSPTAR, PRINT, CLRCN, KBDLOC, HOLD, NEWID
Table 5-9. DIG IN EDP Commands
Command Description Values
SOURCE Analog output source GROSS, NET
OFFSET Zero offset 0%, 20%
ERRACT Error action FULLSC, HOLD, ZEROSC
MIN Minimum value tracked 0–999 999
MINNEG Minimum negative OFF, ON
MAX Maximum value tracked 0–999 999
MAXNEG Maximum negative OFF, ON
TWZERO Zero calibration 0–16 383
TWSPAN Span calibration 0–16 383
Table 5-10. ALGOUT EDP Commands