RL1200 Portable Beam Scale
6
Visit our website
2.3 Scale Setup
2.3.1 Assemble Wheels onto Frame
Use the following steps to assemble wheels onto the RL1200 frame.
1. It is preferable to set the scale base on a box or other item to keep the scale base up off the floor. Tip the scale base
on its side.
Figure 2-1. Scale Base on its Side
2. Place wheel axles through the holes in the frame.
Figure 2-2. Run Axle Through Scale Base Frame Holes
3. Place the wheels and washers on the axles.
Washers must be placed on the insides of the wheels next to the scale frame.
Wheels must be placed with the extended hub next to the scale frame.
Figure 2-3. Place Washers and Wheels on Each Axle
