MSI-4260M Port-A-Weigh Crane Scale
32
Visit our website
8.0
Specifications
Accuracy
± (0.1% +1 d) of applied load
Resolution
2,500 to 3,750 d standard (up to 10,000 d available on non LFT units)
Capacity
5,000 x 1 lb / 2,500 x 0.5 kg
Enclosure
IP66 cast aluminum
Lifting Eye and Lower Link
Top lifting eye with lower link interface that will fit a shackle
Design Overload
200% Safe / 500% Ultimate
Functions
Power
Turns unit on or off
Zero
Zeros applied load up to 100% of capacity
(limited rang in NTEP configurations)
Tare
Tares applied load and displays weight in Net
mode
User
Programmable as test, total, unit, peak hold,
net/gross, view total and print
Display
Five-digit, 1.75'' (44.5 mm) LCD with programmable brightness control
Displayable Units
Pounds (lb) or kilograms (kg) selectable
Annunciators
COZ, Battery Level, Net, Total, lb/kg, Stability, Scale Channels, RF and
Setpoint LEDs
Power
Battery operated, six (6) D cell 1.5 V alkaline batteries; NiMH rechargeable
and/or Lithium
Operating Time
Up to 1000 hours of battery life with typical use, less with RF option;
also depends on display brightness
Operating Temperature
Legal for Trade
-40°F– -20°F (-10°C–40°C)
Operating
-4°F–122°F (-20°C–50°C)
Auto-Off Mode
Powers off after the scale is not used for the set time (in minutes); 15, 30,
45, 60 or OFF selectable
Auto Sleep Mode
Powers down during non-use after the set time (in minutes) and powers up
with weight change or any key press; 5, 15, 30 or OFF selectable
Service Counters
Counts number of lifts over percentage of capacity and lifts over capacity
Calibration
Digital (procedure initiated by calibration switch)
Filtering
OFF, LO, HI-1 or HI-2 selectable
Radio Link
DSSS (Direct Sequence Spread Spectrum)
IEEE 802.15.4
FHSS at 2.4 GHz
Radio Effective Range
Typically 500' (150 m) indoor, 1000' (300 m) outdoor with standard
antennas
Totalization
Standard: Press button or Automatic;
TOTAL weight up to 99999 x 1000 kg/lb
Setpoints
Eight user programmable setpoints. Setpoints 1–3 are visible on the
device and LED outputs. Setpoints 4–8 can only be used by connecting a
compatible RF Rugged Remote Control or RF remote display.
Construction
All features are housed in heavy duty, cast aluminum housing consisting of
three sections:
• The front section of the scale houses the display, controls and all
electronics
• The center section contains the load cell, lifting eye, hook and quick
access to the batteries
• The rear section of the scale features quick access to the batteries
Warranty
One-year limited warranty
Certifications and Approvals
NTEP
CoC Number 19-122
Accuracy Class: IIIL; n
max
: 5000
