MSI-4260M Port-A-Weigh Crane Scale
10
Visit our website
4.0
Setup
This section provides an overview of MSI-4260M Port-A-Weigh crane scale setup menu and instructions.
4.1 Setup Menu
To enter into the MSI-4260M setup menu, press
and
simultaneously.
Figure 4-1. Setup Menu
Parameter
Setting
Description
Test Display – See
Total – See
View Total – Function always available on the RF remote device (
Net/Gross – Function always available on the RF remote device (
Not applicable
Peak Hold – See
Function not available or non-functional in OIML R76 or NTEP HB44 modes
Function not available or non-functional in OIML R76 and 1Unit modes
Print – See
Function User Key 1 – User definable key that can be programmed to one of several functions
Function User Key 2 – User definable key that can be programmed to one of several functions; Only available on
the RF remote being used with the MSI-4260M
Auto Off Time – Prolongs battery life of scale by turning power off after the set time (in minutes) that the scale is not
in use (
Sleep – Time (in minutes) before unit enters sleep mode (
LCD Backlight Intensity – Used to set the display brightness (
Setpoints 1–8 – Used for warnings or process control (
)
Total Mode – Accumulation of multiple weighments (
Weight Filter – Allows the scale to adjust to situations where there may be movement (
)
Weight Units – Toggle units between pounds and kilograms
Function not available or non-functional in OIML R76 and 1Unit modes (
Battery Life – Sets the options for standard or extended battery life (
Table 4-1. Setup Menu Parameters
)XQF
WRWDO
WHVW
)XQF
$2II
VOHHS
GLVSO
VWSW
WRWDO
ILOWU
YQLW
EOLIH
WHVW
WRWDO
XWWO
QHW*U
/($UQ
3+/G
XQLW
SULQW
2))