Setup
© Rice Lake Weighing Systems
●
All Rights Reserved
13
4.4 Sleep
The
Sleep
parameter reduces power consumption by automatically turning off the display during periods of inactivity.
While in the sleep mode, the green acknowledge annunciator blinks at a 1 second rate to indicate the unit is in sleep mode.
To wake up the unit, either a button must be pushed (MSI-4260-M front panel or connected RF remote device) or the weight
must change by 5 d or more.
Sleep must be set to less time than the Auto-Off timer.
1. Press and hold
and
.
displays.
2. Press
to scroll to the
function.
3. Press
. The current
time displays.
4. Press
to scroll through the available times.
5. Press
when the desired time displays.
6. Press
to exit setup and store the settings.
Press
at any time to cancel the procedure.
4.5 Display Brightness
The
Display
menu is used to set the display brightness. There are four fixed brightness settings and one automatic light
sensing brightness setting.
Auto setting automatically detects the ambient light and adjusts the brightness of the LCD backlight accordingly. Bright ambient
light causes the LCD backlight to turn off. The LCD backlight brightness adjusts based on ambient light.
There are four fixed brightness settin
gs,
LO-1
,
LO-2
,
HI-1
and
HI-2
. L
ower brightness settings increase battery life.
1. Press and hold
and
.
displays.
2. Press
to scroll to the
.
3. Press
. The current setting displays.
4. Press
to scroll through the available settings.
The display brightness changes when each setting displays.
5. Press
when the desired setting displays.
displays.
6. Press
to exit setup and store the settings.
Press
at any time to cancel the procedure.
Note
Note
Note
Note
