![Rice Lake INT700 Technical Manual Download Page 22](http://html1.mh-extra.com/html/rice-lake/int700/int700_technical-manual_1454161022.webp)
18
INT700
6.0
Appendix
6.1
Error Codes
6.2
Battery Option
The
INT700
can be operated from the battery if desired. The battery life is approximately 70 hours.
When the battery needs charging, a symbol on the weight display will display. See Section 1.2 on page 2. The scale
will continue to operate for about 10 hours, after which it will automatically switch off to protect the battery.
To charge the battery, plug scale into the main power. The scale does not need to be turned on. Charged up to 12
hours for full capacity.
Just under the quantity display is an LED to indicate the status of battery charging.
• Green LED – indicates battery has a full charge.
• Red LED – indicates battery is nearly discharged
• Yellow LED – indicates battery is being charged.
If the battery doesn’t hold a full charge, the battery life may be expired. Contact Rice Lake Weighing Systems
or a local distributor.
6.3
RS-232 Output Option
The
INT700
can be ordered with a RS-232 output.
Specifications:
RS-232 output of weighing data
ASCII code
7/8 data bits
Parity setable
Baud rate from 600bps to 9600bps
DB9-Female Connector
• pin 2 – Input
• pin 3 – Output
• pin 5 – Signal Ground
Check-weighing output (9 pin d-sub-miniature socket)
• pin 1 – VB
• pin 4 – vcc (5V)(output)
ERROR
CODE
DESCRIPTION
RESOLUTION
- - - - -
Over range
Remove weight from the scale.
If the problem persists, contact the dealer for assistance.
Err 4
Zero setting error
The scale was outside the normal zero setting range either when it was turned on
or when the ZERO key was pressed.
Remove weight from the scale and try again.
Use the TARE key to set the display to zero value.
If the problem persists, contact the dealer for assistance.
Err 6
A/D out of range
The values from the A/D converter are outside the normal range.
Remove weight from the scale if overloaded. Make sure the pan is attached.
Indicates the load cell or the electronics may be faulty.
If the problem persists, contact the dealer
Table 6-1. Error Codes
Note
1
2
3
4
5
6
7
8
9
Summary of Contents for INT700
Page 1: ...INT700 Platform Series Technical Manual 165401...
Page 2: ......
Page 26: ...22 INT700 NOTES...
Page 27: ......