Rice Lake INT700, Technical Manual

Page: 15 / 28

Operation 11
4.5.2 Disable the Checkweighing Function
1. Enter zero into both limits by pressing when the current limits are shown.
2. Press to store the zero values.
4.6 Accumulated Total
The scale can be set to accumulate manually by pressing
.
See the PARAMETERS Section for details
of selecting the method using function P2 com .
Prior to each accumulation, the scale will need to return to zero. Only press when scale is stable, if
the weight is less than 20d, accumulate will not work.
4.6.1 Accumulate
1. Press
.
The current weight will be stored into memory.
ACC 1
will display, then the total in
memory will display briefly before returning to weighing mode. The
M+
annunciator will light. If the
optional RS-232 interface is installed, the weight will be output to a printer or PC.
2. Remove the weight from the scale.
3. Allow the scale to return to zero.
4. Place next weight on the scale.
5. Press .
ACC 2
displays. The updated total will display briefly before returning to weighing mode.
6. Continue process until all weights have been added.
4.6.2 Memory Recall
To view the totals in memory, press .
4.7 Memory Clear
To clear the memory, press and at the same time.
4.7.1 Auto Accumulation
1. Press during self-check, to enter setup mode.
2. Press until
P2COM
displays.
3. Press to enter.
4. Press to select
mode
.
PRINT
ZERO
Note
M+
M+
M+
M+
MR
M+ MR
PRINT
TARE
ZERO
TARE