Program Mode
© Rice Lake Weighing Systems
●
All Rights Reserved
15
3.4 Address File
Address file is used to program factory address, which can be assigned in each item to be printed on the label. Standard format
does not have a print area for address, the address cannot be printed when using these formats. To print an address on the
label, a Free Format with an address print area programmed must be used. Maximum 16 Address (No. 1-16) can be
programmed with up to eight programmable lines. The number of lines depend on the size of the print area or character size
entry.
3.4.1 Program Address File
3.4.2 Print Address File
Operation
Function
From
Weigh mode
press
three times
Enter
S mode
Press
or
Select
Address Program
mode
Press
Enter
Address Program
mode
Enter Address number press
Enter Address number
Enter Address line 2
Enter address
Press
or
then press
Change font size (S1-S5; M1-M5)
Press
Store data and return to
S mode
Table 3-9. Program Address
Operation
Function
From
Weigh mode
press
three times
Enter
S mode
Press
or
Select
Address Program
mode
Press
Enter
Address Program
mode
Press
Enter Address report print mode
Press
Enter start number
Press
Enter end number, print address full report
Enter Address number
Enter address number (Ex. 1) print single
report
Press
Return to
Address Program
mode
Table 3-10. Print Address
