V. OPERATION
5.1- Intended use
- The product is intended for indoor domestic use.
- The product is intended for forward and reverse screwing; and for impact drilling
5.2- Operation:
1. Connect product to a power source (refer to characteristics on product).
2. Wear appropriate protective equipment.
3. Insert bit or accessory in the chuck.
4. Prepare material for work
5. Secure material, if necessary.
Do not use your own weight or body to hold material.
6. Firmly hold tool with both hands. Always maintain a balanced and secured position.
7. Place bit on material. Do not make sudden movements.
8. Press on trigger switch (6) to start operation.
To start the “continuous running”, press on ON/OFF switch then on the locking button (7).
To stop the “continuous running”, press again on ON/OFF switch.
9. Once work is finished, stop product by releasing the trigger switch (6).
Note: do not put down product until chuck has completely stopped rotating.
VI. MAINTENANCE AND STORAGE
Before any intervention on product, ensure that product is disconnected form its
power source.
6.1- Maintenance
Clean plastic parts with a soft clean cloth.
Do not use aggressive cleansers (solvents or abrasive cleansers), or an abrasive sponge.
Do not put or immerse product in water or any other liquid.
Clean chuck and ventilation holes with a soft brush.
6.2- Storage
Product must be stored in a dry location. Always lock up product and keep out of reach of children
