Page
15
/
30
IV. GETTING STARTED
4.1- Unpacking
•
Remove the product from carton and discard all packaging properly.
•
Check if the product and accessories (if any) are intact.
•
If any parts are missing or damaged, do not assemble or operate the machine until the
part has been replaced or the fault has been rectified.
4.2- Assembly
WARNING!
Before starting assembly or changing accessories, ensure the engine is stopped
and cooled down. Besides, disconnect the spark plug wire from the spark plug to
prevent accidental engine starting.
Installing blower tube
•
Connect the extension tube A (7) to the flexible tube (3), then fix the connection with
hose clamp.
•
Connect the flexible tube (3) to the main outlet, then fix the connection with hose clamp.
•
Lossen the clamp wing nut of control handle, then slide onto the extension tube A.
Adjust the control handle position and fix by tightening the clamp wing nut .
•
Align and insert the extension tube A to extension tube B, then turn the tube clockwise
to lock the tubes in place. Repeat the steps to connect the flattened tube (4).
V. OPERATION
5.1- Intended use
•
The machine is designed for blower leaves, lawn clippings or similar materials in home
garden.
•
The product is intended for infrequent outdoor domestic use.
•
Do not use the product for artisanal, industrial, professional and / or commercial
applications (e.g. in construction sites, public parks, forest...).
5.2- Before starting engine
•
The machine is equipped with a 2-stroke air cooled gasoline engine that requires a
mixture of gasoline and oil. The recommended fuel mixing ratio is: gasoline 25 : oil 1.
•
WARNING!
Do not smoke. Keep any open flame away.
•
Gasoline: either lead or unlead, alcohol-free.
•
Motor oil: quality proven 2-stroke motor oil.
Fuelling
•
Transfer approximate 20mL of motor oil into a 1L mixing bottle.
•
Transfer 500mL gasoline into the mixing bottle.
•
Replace the bottle cap and mix well the fuel/oil mixture.
•
Remove the fuel tank cap (5) and completely transfer the fuel/oil mixture into the fuel
tank (6) with aid of a funnel.
•
Wipe any spilled gasoline with a damp cloth.
•
Replace the fuel tank cap.
