36
G
B
ACCESSORIES -
For the connections and the technical data of the optional equipments follow the relevant handbooks.
PROBE
The probe detects the motor temperature to operate the heating system under low
temperature conditions, up to -30°C (connect to connector J6).
code ACG4665
SPARK
In order to make the systems mentioned above give the best performances, you need to
install an antenna tuned on the frequency of the radio receiver installed.
N.B. Pay attention to not let the central wire of the cable to came Into contact with
the external copper sheath, since this would prevent the antenna from working.
Install the antenna vertically and in such a way the remote control can reach it.
SPARK BLINKER WITH IN-BUILT INTERMITTENT CARD
code ACG7059
LATERAL SUPPORT
code ACG7042
SPARK ANTENNA 433
code ACG5452
CODE LEARNIG SYSTEM RADIORECEIVERS
RX433/A
super eterodyne and coupling
code ACG5055
RX433/A
super eterodyne and terminal board
code ACG5056
RX433/A 2CH
super eterodyne, 2 channel and coupling
code ACG5051
RX433/A 2CH
super eterodyne, 2 channel and terminal board
code ACG5052
RADIO TRANSMITTER SUN
SUN 2CH
cod. ACG6052
SUN 4CH
cod. ACG6054
SUN CLONE 2CH
cod. ACG6056
SUN CLONE 4CH
cod. ACG6058
RACK MODULE 4
with zinc plated angle Iron, in 2 m bars.
code ACS9050
BLOCK
BLOCK KEY SELECTOR FOR WALL-INSTALLATION
code ACG1053
BLOCK KEY SELECTOR TO BUILA-IN
code ACG1048
FIT SYNCRO
FIT SYNCRO PHOTOCELLS
for the wall-installation code ACG8026
The range you can set is 10-20 m, 30÷60ft.
You can fit many couples close together thanks to the synchronising circuit.
Add the
SYNCRO TRANSMITTER
code ACG8028
for more than 2 photocells couples (up to 4).
COUPLE OF BUILT-IN BOXES FOR THE FIT SYNCRO
code ACG8051
PAIR OF COLUMNS FOR FIT SYNCRO
H = 0,5 m
code ACG8057
PLATE TO BE CEMENTED
code ACG8103
