RIB ACG6150, Manual

Page: 18 / 48

18
18
G
B
18
18
The Wi-Fi System complies with the standard EN13849-2:2008 and
together with a RIB electronic control panel is a Class 2 protection
device.
The Wi-Fi System through the use of the MASTER Wi-Fi OS card
permits the construction of a system with NOVA Wi-Fi photocells
and TOUCH Wi-Fi strips which also attach to the moveable panel
without the need for a cable collector.
The system constantly monitors the presence of the various safety
devices and the status of the batteries, completely meeting the need for
active safety for all types of openings.
Using the RIB electronic control panel it is possible for the system to
perform an auto test as required by current standards.
Each radio-controlled safety device has its own internal identification code
which distinguishes it from the others.
R
EFERENCE STANDARDS FOR AUTOMATIC DOORS AND
GATES
The installer must ensure that the Wi-Fi System is connected as specified
by the standard EN12453 as per 5.1.1.6 (points e and f) to an electronic
control panel capable of performing an operations check before closing
(AUTO TEST).
Therefore, the use of RIB devices permits system installation in compliance
with current Standards and Directives.
Once machine installation is complete it must be ascertained that it
complies with standard EN13241-1.
RIB may not be held responsible for any damage caused by improper,
wrong or unreasonable use of the product.
M
ASTER Wi-Fi
This is the heart of the system: it runs all of the control (433,92 MHz),
safety and signaling (868,3 MHz) devices programmed in the installation
phase.
MASTER Wi-Fi is available in 4 versions:
- MASTER Wi-Fi with connection couplings (code ACG6094), for use
with all non-CRX RIB electronic control panels.
- MASTER Wi-Fi with terminal block (code ACG6099), for use with other
brands or RIB CRX panels.
- MASTER Wi-Fi FR with terminal block (code ACG6150), for use with
other brands or RIB CRX panels.
- MASTER Wi-Fi OS with terminal block (code ACG6152), for use with
other brands or RIB CRX panels.
S
AFETY DEVICES
MASTER Wi-Fi OS can operate up to 6 safety devices (NOVA Wi-Fi +
VERTIGO Wi-Fi + TOUCH Wi-Fi + TX RED) at the same time.
- NOVA Wi-Fi photocells (code ACG8037): can be connected to a
TOUCH mechanical strip (code ACG3015) or a resistive strip on both
the photocell transmitter and the photocell receiver.
- VERTIGO Wi-Fi photocells (VERTIGO Wi-Fi 8 code ACG8042 -
VERTIGO Wi-Fi 10 code ACG8043): wireless vertical photocells
substituting the sensitive edge.
- TOUCH Wi-Fi strip (code ACG3016), with built-in transmitter/receiver.
- TX RED (code ACG6202): radio transmitter to manage mechanical or
resistive safety strips.
C
ONTROLS
It is also possible to connect a wired controls with N.O. contact (key
selectors, push-buttons...).
V
ISUAL SIGNALS
MASTER Wi-Fi OS can operate one or more SPARK Wi-Fi Blinkers
(868,3 MHz) code ACG7064.
MASTER Wi-Fi OS has LEDs for monitoring system status and for
identifying photocells or strips with low or exhausted batteries.
S
OUND SIGNALS
MASTER Wi-Fi OS has a buzzer which signals installation phases and a
warning if the batteries are low or exhausted or, acts as an alarm in case
one of the devices is not functioning.
SPARK Wi-Fi
Code ACG7064
NOVA Wi-Fi
Code ACG8037
TOUCH Wi-Fi
Code ACG3016
TOUCH
Code ACG3015
or other brands mechanical or resistive strip
TX RED
Code ACG6202
VERTIGO Wi-Fi 8
Code ACG8042
VERTIGO Wi-Fi 10
Code ACG8043