7
Parameter List
Description of Monitor Mode
There are eight displays can be selected in the monitor mode. Press
FUN
DATA
to switch the
display in accordance with below sequence under monitor mode. User can determine one of
eight displays as the main display from function F_006 (Selection of Main Display). Please
refer to the following illustrations:
Display 1
(Output Frequency)
Display 2
(Frequency Command)
Display 3
(Output Voltage)
Display 5
(Output Current)
Display 6
(Motor Speed(RPM))
Monitor
Mode
Display 4
(DC Bus Voltage)
FUN
DATA
FUN
DATA
KEYPAD
Hz
V
A
KEYPAD
Hz
V
A
KEYPAD
Hz
V
A
KEYPAD
Hz
V
A
KEYPAD
Hz
V
A
FUN
DATA
FUN
DATA
KEYPAD
Hz
V
A
FUN
DATA
FUN
DATA
KEYPAD
Hz
V
A
KEYPAD
Hz
V
A
Display 7
(Machine Speed(MPM))
Display 8
(Terminal Status and
Heat Sink Temperature)
FUN
DATA
FUN
DATA
Func.
Name
Description
Range of
Setting
Unit Default
F_000 Drive Information
0: Software version
1: Drive model number
2: Drive running hours
3: Drive supply power time
4: Software checksum code
5: Reserved
─
─
─
F_001
Start Command
Selection
Start command
Rotation direction
command
0~11
─
3
0:
FWD or REV terminal FWD or REV terminal
1:
FWD terminal
REV terminal
2:
Keypad “RUN” key
FWD, REV terminal
3:
Forward direction
4:
Reverse direction
5~7:
Reserved
Reserved
8:
Communication
interface
Communication
interface
9:
Communication
interface
REV terminal
10:
FWD terminal
Communication
interface
11:
Keypad “RUN” key
Communication
interface
a. Select one of eight displays as the main display from function F_006 (Selection of Main
Display).
b. Determine one of eight displays as the main display according to the application. When
the parameter of function is completed without pressing key, the drive will automatically
switch back to the main display after 3 minute.
