RHINO RHINO TW144, Operator'S Manual

Page: 94 / 196

INTRODUCTION
TW144 01/11 Introduction Section 2-2
© 2011 Alamo Group Inc.
INTRODUCTION
We are pleased to have you as a Rhino customer. Your Rotary Cutter has been carefully designed with care
and built with quality materials by skilled workers to give maximum service with minimum down time. This
manual is provided to give you the necessary operating and maintenance instructions for keeping your rotary
cutter in top operating condition. Careful use and timely service saves extensive repairs and costly downtime
losses. Please read this manual thoroughly. Understand what each control is for and how to use it.
Rhino typically offers three types of shielding to protect the operator, passerby, livestock, and property from
thrown objects... deflectors, single chain guards, and double chainguards. Shielding should be selected based
on the intended use of the mower. Double chainguards or deflectors should be used for highway, right-of-way,
parks or greenbelt mowing or all other mowing where human dwellings, vehicles, or livestock could be within
300 feet of the mower. Chainguards are more durable, provide a longer service life and require less
maintenance and replacement than deflectors. Single chainguards may be sufficient for agriculture and other
mower use only where passersby or property are not within 300 feet of the mower during operation.
No shielding is 100% effective in preventing thrown objects. The possibility of injury and property damage from
this hazard can be substantially reduce by selecting proper shielding, maintaining the mower and shielding in
good operational condition, inspecting the area for foreign debris before mowing, operating the mower at a
minimum cutting height of 4", and keep unprotected persons at a minimum distance of 300 feet from the
mower at all times during operation.
Safety is of primary importance to the owner/operator and to the manufacturer. Observe all safety precautions
decaled on the machine and noted throughout the manual for safe operation of implement. If any assistance or
additional information is needed, contact your authorized Rhino dealer. The owner/operator/dealer should
know and understand the Safety Messages before assembly and be aware of the hazards of operating this
cutter during assembly, use, and maintenance. The Safety Alert Symbol combined with a Signal Word, as seen
below, is intended to warn the owner/operator of impending hazards and the degree of possible injury faced
when operating this machine.
Indicates an imminently hazardous situation that, if not avoided, WILL result in DEATH OR
VERY SERIOUS INJURY.
Indicates an imminently hazardous situation that, if not avoided, COULD result in DEATH
OR SERIOUS INJURY.
Indicates an imminently hazardous situation that, if not avoided, MAY result in MINOR
INJURY.
Identifies special instructions or procedures that, if not strictly observed, could result in
damage to, or destruction of the machine, attachments or the environment.