background image

 

4

Detailed Feature Descriptions 

 

Automatic Immobilisation 

The immobiliser will automatically activate 38 seconds after the ignition is switched off - This is indicated via the  dash mounted 
LED, which will illuminate to confirm the system has entered auto immobilise mode. During this time the vehicle cannot be started 
until a valid remote has disarmed the system.  After disarming, if the ignition is not switched on before 38 seconds have elapsed, 
the alarm will again go into auto immobilise mode.  

 
 

Automatic re-arm & relock (Programmable) 

This feature prevents accidental disarming by the owner i.e. the owner turns the immobiliser off but is then distracted and forgets 
that they have deactivated the system.  If a door is not opened or ignition turned on within 60 seconds from when the system is 
turned off by the remote, the system will

 fully re-arm & re-lock the vehicle.                                                         

Note:

 The immobiliser will enter auto immobilise mode after 38 seconds (the LED will come on constantly to indicate the vehicle is 

immobilised). At the 60-second mark, the system will fully arm & the doors will lock – the blinkers will flash once & the siren will 
beep once & the LED will start flashing.

 

 

 

Door Ajar Warning (Programmable)

 

If  the  vehicles  doors  are  not  properly  closed  when  you  try  to  activate  your  immobiliser  system,  the  indicators  will  flash  and  the 
siren will beep for 3 seconds to alert you that the vehicle is not secure. 
 

Timed Headlight Delay (Optional connection by installer at extra cost) 

You can have your car headlights turn on automatically for 15 seconds when you arm the immobiliser by remote control. This may 
allow  you  for  instance  to  see  your  way  to  your  front  door,  or  out  of  a  dark  car  park.  You  can  turn  the  lights  off  before  the  15-
second period ends by pressing the left button on your remote. 
 
 
 
 
 
 
 
 

 
 
Perimeter Night Light (Programmable)  

When  this  feature  is  on,  the  indicators  will  stay  on  constantly  for  20  seconds  on  disarm,  or  until  the  ignition  is  turned  on.  This 
allows for illumination around the vehicle at night. 
 
 
 
 
 
 
 
 
 

 
Dome Light Extension (Programmable)  

The dome (interior) light comes on automatically when the system is disarmed via remote, enabling the owner to verify the vehicle 
is  safe  inside.  The  light  stays  on  for  20  seconds,  or  until  the  ignition  is  turned  on.  The  dome  (interior)  light  also  comes  on 
automatically when the ignition is turned off, enabling the owner to quickly gather belongings before exiting the car. The light stays 
on  for  20  seconds,  or  until  the  system  is  armed  via  remote,  or  until  the  ignition  is  turned  on  again.  NOTE:  If  you  activate  the 
Automatic Rearm & Relock Feature, this feature will be disabled. 
 
 

Glass Break Sensor 

The RES4601A with the addition of a special cabin microphone incorporates intelligent glass break sensing circuitry. This inbuilt 
device will trigger the alarm system, provided it registers the correct sound frequency parameters for breaking glass & that the 
impact sensor also registers a corresponding vibration to the vehicle. This ensures accurate detection of glass breakage. 

 
Door Lock on Ignition (Programmable)  

If you have central locking connected, when this feature is on the doors will lock when the ignition is turned to on, and unlock when 
the ignition is turned to off. This is to prevent anyone but occupants in the vehicle from being able to open the doors. 
 

Summary of Contents for Rhino RAv3
























Reviews: