10
PAT™ Past Alarm Trigger
Memory
13
SELECT
to replay
memory
After pressing the remote 13 times to enter this mode, turn the
ignition off. Your Rhino Alarm offers a unique memory that
stores the ten last reasons why the alarm was triggered. This
memory cannot be erased.
1 Beep, 1 Flash - Voltage Drop Alarm
2 Beep, 2 Flashes - Glass Break Alarm
3 Beep, 3 Flashes - Shock Sensor Alarm
4 Beep, 4 Flashes - Power Fail Alarm
5 Beep, 5 Flashes - Ignition Alarm
6 Beep, 6 Flashes - Aux Alarm
7 Beep, 7 Flashes - Door Alarms
8 Beep, 8 Flashes - Bonnet / Boot Alarm
If two previous alarms were recorded i.e. voltage drop and
shock sensor the LED will flash and the siren will beep once for
voltage drop, then no noise for 1 second then beep three times
for shock sensor.
The last memory heard is the most recent
alarm sector triggered.
Turn the ignition to on to exit this
mode.
Current Sense Override
15
ON
When this feature is on, the alarm will not trigger when a
sudden change in battery current is sensed.
NOTE: This will ONLY beep out the state of this feature i.e. no
other active features in the register will be beeped out. I.e. if this
feature is NOT on, then NO beeps will be heard.
Transformer Interface
(Only required if the old style
OEM enhancement is used)
19
OFF
When this feature is turned on then the Transformer module
may be interfaced to allow the user to arm and disarm their
vehicle via the factory remote control.
If this featured is turned on then a single beep will be produced.
If this feature is turned off then no beeps will be heard.
Wireless Keypad Mode
21
OFF
When this feature is turned on then the Wireless Keypad may
be used to disarm the vehicle while still using the standard
factory remotes to lock and unlock the vehicle. See the Wireless
Keypad instructions for further details.
If this featured is turned on then a single beep will be produced.
If this feature is turned off then no beeps will be heard.
Courier mode
22
OFF
When enabled, this feature allows people to arm/disarm their
alarm with ignition on. This can be useful if you get in and out of
your car repeatedly and need to leave it running unattended.
When in courier mode the shock and glass sensors will be
disabled while engine is running. All sensors will function
normally when the alarm is armed with the ignition switched off.
If this featured is turned on then a single beep will be produced.
If this feature is turned off then no beeps will be heard.
