RHINO RAMV2, Instruction Manual, Page: 6 / 40

6
1.2. Alarm Features
Advanced All-in-1 design
Remote controls have Code Hopping Technology (Anti-Scanning, Anti-Code
Grabbing)
SSR™ Solid State Remote Controls (2 supplied)
Long Life Lithium Cell Remote Control Batteries
Ultra-Bright Red Flashing Dash LED Light
Personal Panic Button Via Remote Control
Automatic Siren Reset Period (30 Seconds)
Visual arming and disarming via blinkers
All Points Of Entry Protection
PAT™ Past Alarm Trigger Memory History Reporting Mode
Service And Siren Override Mechanical Key Switch
Safety Circuit Prevents Arming While Ignition On
Learning Mode For Optional Transmitters (Remote Controls)
Negative Pulse Central Locking Outputs
Two Point Engine Immobilisation (Optional 3
rd
point)
Siren Battery Backup System
Auto Bypass
Glass Break Sensor
Auto Immobilise
Two Stage Car Body Impact Sensor
Test / Fault Finding Mode
1.3. Selectable System Features
Arming And Disarming Confirmation Beep
Passive Arming Programmable Via Remote Control
Door Ajar Warning (If A Door Is Left Open)
Automatic Re-Arm In Case Of Accidental Disarm
Auto Re-Lock For Accidental Disarm Where Central Locking Is Connected
Quiet Arming Selectable Via Remote Control
Impact Sensor And Ultrasonic Isolation Programmable Via Remote Control
Electric Boot Release Output Via Remote Control
Lock Pulse On Alarm Trigger
Multiple Vehicle Remote Controls
Silent Operation
Valet Mode
Central Closure
Door Lock On Ignition
2 Second Exit Delay
Perimeter Night Light
External Pre-Warn Output
Shock Sensor Sensitivity Adjustment
TransRAM mode for vehicles with factory keyless entry systems. Allows for factory
remote controls to arm/disarm the system. (Part No: TRANSTX)
Wireless Keypad mode to allow arm/disarm of the system without remote controls.
(Part No: WKPB)