RHINO RAMV2, Instruction Manual

Page: 22 / 40

22
2.8.15. PAT
TM
– Past Alarm Trigger Memory/History
REMOTE CONTROL
To identify the cause of the last TEN reasons why the alarm has triggered, you can
follow the steps described in Section 3.3.3. Changing Register 3 – Page: 28. Or type
your
PIN number and HISTORY from a mobile phone, and send it to the alarm. Once
the message is sent the alarm you will receive an SMS back saying
ALARM HISTORY:
Oldest XXX. XXX. XXX. XXX. … Latest
(where XXX is the cause of the alarm being triggered)
2.8.16. SMS Controlled Relay Output
The
RAM incorporates 3 onboard SMS controlled relay output that can be switched on
and off with a simple message.
ONOUT1/OFFOUT1: Type your PIN number and ONOUT1 from a mobile phone,
and send it to the alarm to activate the relay output. Once the message is sent the alarm
will respond with “Output1 turned on.” To turn the relay output off send
OFFOUT1
and the alarm will respond the with “Output1 turned off.”
To activate outputs two and three simply substitute the number accordingly i.e.
onout2, offout2, onout3 and offout3. There is also a command “test” i.e. 000000test
which turns on all three outputs and returns the status of the alarm.
123456OFFOUT1 123456ONOUT1
123456ONOUT1
123456OFFOUT1