RHINO RAMV2, Instruction Manual

Page: 24 / 40

24
3.1.2. Learn a new Remote Control with Remote
To add a new transmitter to your alarm, simply follow the procedure below:
A . Turn the vehicle’s ignition on.
B . Immediately press and hold the Bottom button on the Original remote control
until the siren starts to beep (approximately 4 seconds) and then release the button.
C . Immediately press and hold the same (Bottom) button on the New remote control
for at least 4 seconds.
D . Turn the vehicle’s ignition off.
E
. The new remote control is now programmed into the alarm.
F . Test to see if that remote works with the alarm
.