RHINO GPD-40 Fence Pro Owner'S Manual Download Page 6

4

perform a pre-operation inspection of the 

driving mechanism before each use and 

correct any problem.

Do not lend or rent 

your post driver with-

out the instruction manuals. Be sure that 

anyone using it understands the informa-

tion contained in these manuals.

Do not use this post 

driver for any purpose 

other than driving posts into the ground. 

Misuse may result in personal injury or 

property damage, including damage to the 

machine

Minors should never 

be allowed to use this 

power tool. Bystanders, especially chil-

dren, and animals should not be allowed in 

the area where it is in use.

NEVER

 let your 

power tool run unat-

tended. When it is not in use, shut it off 

and make sure that unauthorized persons 

do not use it.

Do not operate this 

post driver unless 

the operator is wearing safety glasses, 

safety shoes, hearing protection, gloves 

or any other safety equipment advised by, 

ANSI, NIOSH, OSHA, or any other safety 

regulatory agency, or the employer or the 

owner of this post driver.
Bystanders should, at a minimum, wear 

safety glasses and hearing protection while 

in the presence of this power tool during 

operation.

Prolonged use of a 

power tool (or other 

machines) exposing the operator to vibra-

tions may produce white finger disease 

(Raynaud’s phenomenon) or carpal tunnel 

syndrome. These conditions reduce the 

hand’s ability to feel and regulate tem-

perature, produce numbness and burning 

sensations and may cause nerve and circu-

lation damage and tissue necrosis.

Not all factors contributing to white finger 

disease are known, but cold weather,  

smoking and diseases or physical condi-

tions that affect blood vessels and blood 

transport, as well as high vibration levels 

and long periods of exposure to vibration 

are mentioned as factors in the develop-

ment of white finger disease. 
In order to reduce the risk of white finger 

disease and carpal tunnel syndrome, please 

note the following:
•  The Rhino GPD-40 Fence Pro

 has 

been designed with spring dampened 

anti-vibration handles to reduce the 

transmission of vibrations created by the 

machine to the operator’s hands. 

  An anti-vibration system is recommend-

ed for those persons using power tools 

on a regular or sustained basis.

•  The handle opposite the throttle handle 

has been fitted with an EVA foam grip 

further dampening vibrations.

•  Wear gloves and keep your hands warm.
•  Ensure that the EVA foam and the 

spring dampening system are in good 

working condition.

IMPORTANT SAFETY INFORMATION

POST DRIVER SAFETY... continued

!

WARNING

!

DANGER

!

CAUTION

IMPORTANT

NOTE

!

WARNING

!

DANGER

!

CAUTION

IMPORTANT

NOTE

!

WARNING

!

DANGER

!

CAUTION

IMPORTANT

NOTE

!

WARNING

!

DANGER

!

CAUTION

IMPORTANT

NOTE

!

WARNING

!

DANGER

!

CAUTION

IMPORTANT

NOTE

!

WARNING

!

DANGER

!

CAUTION

IMPORTANT

NOTE

Summary of Contents for GPD-40 Fence Pro





























Reviews: