RHINO GPD-40 Fence Pro Owner'S Manual Download Page 5

3

The Rhino

®

 GPD-40 Fence Pro

 pow-

ered gas operated post driver is designed 

to drive fence posts, ground rod, post 

delineator posts, grape stakes, form pins, 

tent stakes and other like items into the 

ground. Uses, other than those intended, 

can result in injury to the operator as well 

as those around the operator. Damage to 

the driver and to the surrounding area may 

result as well.
This post driver is intended for use by pro-

fessional installers. Never allow children 

to operate this tool.
Most accidents can be prevented if you 

follow all instructions in this manual and 

on the post driver. The most common haz-

ards are discussed below, along with the 

best method to protect yourself and others.

UNDERGROUND 

UTILITIES:

 Driving 

a post into an underground utility can be 

EXTREMELY DANGEROUS

, exposing 

the operator and those around to poten-

tially life threatening danger. Damage to 

surrounding property can also occur as a 

result of a post being driven into an under-

ground utility. Be absolutely certain that 

you are aware of all underground utilities 

in the area in which you intend to drive 

posts. Ensure that a certified locating ser

-

vice has identified all underground utilities 

prior to beginning your project. Failure to 

do so can be catastrophic. Underground 

utilities include but are not limited to: 

Electric, Gas, Telephone, Water, Sewer, 

TV Cable, Lawn Sprinklers, etc.

GASOLINE

: Gaso-

line is HIGHLY 

FLAMMABLE and EXPLOSIVE. You 

can be burned or seriously injured when 

handling fuel.

EXHAUST

: The ex-

haust from the engine 

contains poisonous carbon monoxide gas 

that can build up to dangerous levels in 

closed areas. Breathing carbon monoxide 

can cause unconsciousness or death. 
Never run the engine in a closed or even 

partly closed area where people may be 

present.

The engine exhaust 

from this product 

contains chemicals known to the State of 

California to cause cancer, birth defects or 

other reproductive harm.

ENGINE  

MAINTENANCE:

 

Improperly maintaining the engine on this 

power tool, or failure to correct a problem 

before operation, can cause a malfunc-

tion in which you can be seriously hurt or 

killed.
In accordance with the engine owner’s 

manual, always perform a pre-operation 

inspection of the engine before each use 

and correct any problem.

DRIVER  

MAINTENANCE

Improperly maintaining the driving 

mechanism on this power tool, or failure 

to correct a problem before operation, can 

cause a malfunction in which you can be 

seriously hurt or killed.
In accordance with this manual, always 

IMPORTANT SAFETY INFORMATION

POST DRIVER SAFETY

!

WARNING

!

DANGER

!

CAUTION

IMPORTANT

NOTE

!

WARNING

!

DANGER

!

CAUTION

IMPORTANT

NOTE

!

WARNING

!

DANGER

!

CAUTION

IMPORTANT

NOTE

!

WARNING

!

DANGER

!

CAUTION

IMPORTANT

NOTE

!

WARNING

!

DANGER

!

CAUTION

IMPORTANT

NOTE

!

WARNING

!

DANGER

!

CAUTION

IMPORTANT

NOTE

Summary of Contents for GPD-40 Fence Pro





























Reviews: